Manuale d’uso / di manutenzione del prodotto SCE 2000 4/8xFE del fabbricante Cisco Systems
Vai alla pagina of 131
Corporate Headquarters Cisco S ystem s, In c. 170 West Tasman Driv e San Jose, CA 9 5134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS ( 6387) Fax: 408 526-4100 Customer Order Number: DOC-782605= Text Part Number: OL -7826-05 Cisco SCE 2000 4/8xFE Inst allation and Configuration Guide Version 3.
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRO DUCTS IN THIS MANUAL ARE SUBJ ECT TO CHANGE WI THOUT NOTICE. ALL S TATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELI EVED TO BE ACCURATE BUT ARE P RESENTED WITHOUT WARRANTY OF ANY KIN D, EXPRESS OR IMPLIED.
Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 i Preface v Document Revision History v Audience vi Organization vi Related Publications vii Conventions viii Obtaining Documentation ix World Wide Web ix Documentation CD-ROM ix Ordering Documentation ix Documentation Feedback x Obtaining Technical Assistance x Cisco.
Content s Cisco SCE 2000 4/8xFE Installation and Configuration Guide ii OL-7826-05 Back Panel 2-4 Checking the Shipping Container Contents 2-5 SCE 2000 Installation Checklist 2-6 Topology 3-1 The SCE .
Contents Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 iii Replacing the Battery 4-22 Connecting the Management Interfaces and Performing Initial System Configuration 5-1 Conne.
Content s Cisco SCE 2000 4/8xFE Installation and Configuration Guide iv OL-7826-05 Managing SCE 2000 Configurations 7-4 Viewing Configuration 7-4 Saving the Configuration Settings 7-5 Recovering a Pre.
Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 v This preface describes who should read the SCE 2000 4/8xFE Installation and Configurati on Guide , how it is or ganized, a nd its document conventions. Document Revision History Cisco Service Control Release Part Number Publication Date Release 3.
Preface Audience Cisco SCE 2000 4/8xFE Installation and Configuration Guide vi OL-7826-05 Audience This guide is for the networking or computer tec hnician responsible for installing and confi guring the SCE 2000 platform on-site.
Preface Related Publications Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 vii Chapter 8 Troubleshooti ng (on page 8-1 ) This chapte r provides basic system startup tr oubleshoot ing information.
Preface Conventions Cisco SCE 2000 4/8xFE Installation and Configuration Guide viii OL-7826-05 Conventions This document uses the following conventions: Convention Descripti on boldface font Commands an d keywor ds are in boldface . italic font Arguments for whic h you sup ply values are in italics .
Preface Obtaining Documentation Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 ix Obtaining Documentation The following sections provide sources for obtaining documentation from Cisco Systems.
Preface Obtaining T echnical Assistance Cisco SCE 2000 4/8xFE Installation and Configuration Guide x OL-7826-05 Documentation Feedback If you are reading Cisco product documentation on the W o rld W ide W eb, you can submit technical comments electronically .
Preface Obtaining T echnical Assistance Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 xi Cont acting T AC by Using the Cisco T AC Website If you have a priority level 3 (P3) or priority level 4 (P 4) problem, contact T AC by going to the T AC website http://www .
.
Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 1-1 This chapter provides a general overview of the Ci sco Service Control solution.
Chapter 1 General Overview Cisco Service Control Capabilities Cisco SCE 2000 4/8xFE Installation and Configuration Guide 1-2 OL-7826-05 Service Control for Broadband Service Providers Service provider.
Chapter 1 General Overview The SCE Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 1-3 Programmability allows new services to be de ployed quickly and provides an easy upgrade path for network, application, or service growth.
Chapter 1 General Overview Management and Collection Cisco SCE 2000 4/8xFE Installation and Configuration Guide 1-4 OL-7826-05 The following diagram illustrates a common deploy ment of an SCE platform in a network.
Chapter 1 General Overview Management and Collection Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 1-5 Network Management Cisco provides complete network FCAPS (Fault, Configuration, Accounting, Performance, Security) Management.
Chapter 1 General Overview Management and Collection Cisco SCE 2000 4/8xFE Installation and Configuration Guide 1-6 OL-7826-05 Data Collection The Cisco Service Control solution generates usag e data and statistics from the SCE platform and forwards them as Raw Data Records (RDRs), using a simple TCP-based protocol (RDR- Protocol).
Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 2-1 This chapter provides an introduction to the SCE 2000 4/8xFE Pl atform, the Service Control hardware component.
Chapter 2 Introduction to the SCE Platform Front Panel Cisco SCE 2000 4/8xFE Installation and Configuration Guide 2-2 OL-7826-05 Figure 2-1: SCE Platfor m Front Panel T able 2-2 SCE 2000 Po r ts Port Quantity Description Connect This Port To… Mng1/ Mng2 2 10/100/1 000 Ether net RJ-45 ports for manageme nt of the SCE 2000 .
Chapter 2 Introduction to the SCE Platform Front Panel Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 2-3 T able 2-3 SCE 2000 LED Groups LED Groups Description Power A • Conti.
Chapter 2 Introduction to the SCE Platform Back Panel Cisco SCE 2000 4/8xFE Installation and Configuration Guide 2-4 OL-7826-05 LED Groups Description Mng The Mng port LEDs indicate the operational st.
Chapter 2 Introduction to the SCE Platform Checking the Shipping Container Contents Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 2-5 Checking the Shipping Container Contents Use the SCE 2000 Component List to check the contents of the SCE 2000 platform shipping container .
Chapter 2 Introduction to the SCE Platform SCE 2000 Installation Checklist Cisco SCE 2000 4/8xFE Installation and Configuration Guide 2-6 OL-7826-05 SCE 2000 Installation Checklist T o assist y ou with your installation and to provide a historical record of what was done by whom, photocopy the following SCE 2000 Installation Checklist.
Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 3-1 This chapter describes the possible deployment topologies of the SCE 2000 . The Cisco SCE solution offer s a number of basic topolog y options that permit the user to tailor the SCE Platform to fit the needs of a particular installation.
Chapter 3 T opology T opology Consider ations Cisco SCE 2000 4/8xFE Installation and Configuration Guide 3-2 OL-7826-05 • Number of links — The SCE 2000 m ay be connected to one or two FE links. This is relevant for both Inline and Receive-Only topologies.
Chapter 3 T opology T opology Consider ations Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 3-3 Link Continuity The bypass mechanism of the SCE 2000 allows traffic to continue to flow , if desired, even if the device itself is not functioning.
Chapter 3 T opology Physical T opologies Cisco SCE 2000 4/8xFE Installation and Configuration Guide 3-4 OL-7826-05 Physical T opologies Following are descriptions of a number of physical topologies that the SCE 2000 supports. Single SCE 2000 T opologies A single SCE 2000 supports both single FE link and dual FE link t opologies.
Chapter 3 T opology Physical T opologies Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 3-5 Single Link: Receive-only T opology In this topology , an external switch resides phy sically on the FE link between the subscribers and the network.
Chapter 3 T opology Physical T opologies Cisco SCE 2000 4/8xFE Installation and Configuration Guide 3-6 OL-7826-05 Dual link: Inline Inst allation In this topology , one SCE 2000 is connected inline in two full dupl ex, FE links. In case the two links are load-shared, asymmetrical routing might occur , and some of the flows may be split, i.
Chapter 3 T opology Physical T opologies Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 3-7 Dual Link: Receive-Only T opology In this topology , one SCE 2000 is connected in receive-only mode to two full duplex, FE links using external switchs.
Chapter 3 T opology Physical T opologies Cisco SCE 2000 4/8xFE Installation and Configuration Guide 3-8 OL-7826-05 T wo Cascaded SCE 2000s: Inline T opology This topology allows both control and monitori ng functionality where re dundancy is required and “inline” connection is used.
Chapter 3 T opology Physical T opologies Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 3-9 SCE 2000 Configuration There are four topology-related parameters: • Connection mod.
Chapter 3 T opology Physical T opologies Cisco SCE 2000 4/8xFE Installation and Configuration Guide 3-10 OL-7826-0 5 Physically Connected Links Parameter If the system consists of more than one device, this parameter defines which link is connected to this SCE 2000 .
Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-1 This chapter explains how to install a SCE 2000 platform in a rack or in a general tabletop or workbench installation. Additionally , this chapter contains instructions for install ing or replacing the power supply units and fan modules.
Chapter 4 Installation and Maintenance Preparing to Install the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-2 OL-7826-05 Figure 4-1: SCE Platfor m Dimensions T able 4-1 SCE 2000 Dimensio ns Dimension Measurement Height 3.
Chapter 4 Installation and Maintenance Preparing to Install the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-3 Site Requirement Guidelines The environmenta.
Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-4 OL-7826-05 *Short term is defined as not more than 96 consecu tive hours, not more than 15 days in one year . 360 hours total in any given year , but no more than 15 occurrences in a one-year period.
Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-5 Installation Precautions The router should already be in the area where you will install it, and your installation location should already be determined.
Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-6 OL-7826-05 Step 4 Attach the rubber feet by removing the adhesive strips and af fix the rubber feet onto the marked locations (on the bottom panel).
Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-7 Att aching the Bracket s to the SCE 2000 Before instal.
Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-8 OL-7826-05 Att aching the Crossrail Support s to the Rack When mounting in a rack with four posts (front and back) the two crossrail supports are m ounted one on each side of the rack.
Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-9 Mounting the System to the Rack When the appropriate mounting brackets are securely installed, the SCE 2000 can be installed into the rack.
Chapter 4 Installation and Maintenance Installing the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-10 OL-7826-0 5 Note Since the brackets suppo rt the weight of the en tire SCE 2000 chassis, be sure to use all four scre ws to fasten the two rack-mount brackets to t he rack posts .
Chapter 4 Installation and Maintenance Power Supply Overview Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-11 Figure 4-11: Gr ounding t he Unit (DC) This completes the procedure for installing the SCE 2000 chassis. Proceed to the next section, Connecting to the Power Supply , to continue the installation.
Chapter 4 Installation and Maintenance Power Supply Overview Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-12 OL-7826-0 5 The handle of the AC unit is at the bottom of the unit. Figure 4-12: AC Po wer Module The handle of the DC unit is at the top of the unit.
Chapter 4 Installation and Maintenance Power Supply Overview Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-13 Refer to the following tables for LED status information T able .
Chapter 4 Installation and Maintenance Removing and Replaci ng a Power Supply Unit Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-14 OL-7826-0 5 Power Supply Specifications The following.
Chapter 4 Installation and Maintenance Removing and Replaci ng a Power Supply Unit Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-15 Warning Never install an AC power module and a DC power module in the same chassis.
Chapter 4 Installation and Maintenance Removing and Replaci ng a Power Supply Unit Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-16 OL-7826-0 5 Powering Down a DC-Input Power Supply Uni.
Chapter 4 Installation and Maintenance Removing and Replaci ng a Power Supply Unit Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-17 Replacing the Power Supply Unit Warning Do not mix AC-input and DC-input p ower supply units i n the same SCE 2000 platform .
Chapter 4 Installation and Maintenance Removing and Replaci ng a Power Supply Unit Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-18 OL-7826-0 5 Reconnecting AC-Input Power Supply Unit The following procedures explain how to reconnect an AC-input power to the SCE 2000 platform.
Chapter 4 Installation and Maintenance Removing and Replaci ng a Power Supply Unit Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-19 Warning W i ring should be done b y a professional in accordance with state and local electrical codes.
Chapter 4 Installation and Maintenance Fan Module Overview Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-20 OL-7826-0 5 Step 8 Ensure that the power supply is properly ali gned and t he installation screw is tightened. This completes the steps for reconnec ting the DC-input power supply to the SCE 2000 platform .
Chapter 4 Installation and Maintenance Fan Module Overview Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 4-21 T o remove the fan module, complete the following steps: Step 1 Using a 1/4-inch flat-blade screwdriver , loosen the two captive screws on the faceplate of the fan module.
Chapter 4 Installation and Maintenance Replacing the Battery Cisco SCE 2000 4/8xFE Installation and Configuration Guide 4-22 OL-7826-0 5 Replacing the Battery The SCE 2000 has a lithium battery on its main circuit board. When the battery loses its charge, call Cisco T echnical Support to replace the battery .
Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-1 This chapter explains how to connect the SCE 2000 platform to a local console and perform the initial system configuration via the setup wizard that runs automatically . Additionally , this chapter contains instructi ons for cabling the Fast Ethernet Managem ent interface.
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Connecting the Local Cons ole Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-2 OL-7826-05 Sett.
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-3 Initi.
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-4 OL-7826-05 Parameter Definition local time and date Current local time and date.
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-5 Parameter Definition enterprise traps status Sets th e status of the enterprise traps.
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-6 OL-7826-05 Each group of related parameters is prefaced by a question, asking whether you want to enter the menu.
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-7 Step 2: Configuring the Hostname The hostname is used to identify the SCE 2000 .
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-8 OL-7826-05 Note The default passwor d for all l evels is “ cisc o ”.
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-9 Y ou must enter the time setting menu in order to conf igure SNTP settings.
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-10 OL-7826-0 5 • T o accept the display ed default value, press Enter .
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-11 • T o disable DNS lookup, type n and press Enter .
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-12 OL-7826-0 5 Would you like to enter th e RDR-formatte r configura tion menu? [no]: y Type y and press Enter .
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-13 Entry Format s Each ACL may permit/deny access to any IP address, one or more ranges of IP addresses, or one or more individual IP address.
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-14 OL-7826-0 5 Would you like to enter th e Access lists configurat ion menu? [ no]: y Type y and press Enter .
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-15 • When all ACLs have been created, press Enter .
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-16 OL-7826-0 5 Ent.
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-17 Step 5 The maximum number of GET communities is 20.
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-18 OL-7826-0 5 Step 13 The maximum number of trap managers is 20.
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-19 Step.
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-20 OL-7826-0 5 • On-Failure behavior — Determines the behavior of the SCE 2000 upo n failure, or reboot.
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-21 Enter Physicall y connected link: 0- link-0 1- link-1 Enter your choice [0]: Step 5 Specify the SCE 2000 priority .
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-22 OL-7826-0 5 E XA MPL E 2: Following is a sample topology configuration for a no n-redundant inline topology .
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-23 Step 10: Completing and Saving the Configuration When you have completed the entire configuratio n, the system checks for errors.
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Initial System Configuration Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-24 OL-7826-0 5 Do .
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Connecting the Management Interface Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-.
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Connecting the Management Interface Cisco SCE 2000 4/8xFE Installation and Configuration Guide 5-26 OL-7826-0 5 Cabling the Management Port The SCE 2000 has two management ports, labeled Mng1 and Mng 2.
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configur ation Connecting the Management Interface Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 5-27 At this point, check that the Link/Active LED is green.
.
Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 6-1 This chapter provides instructions for cabling the Fast Ethernet ports for both one and two SC E 2000 topologies, and for configuring Fast Ethernet (FE) interface parameters.
Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4/8xFE Installation and Configuration Guide 6-2 OL-7826-05 Cabling Diagrams Bef.
Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 6-3 In the single link i.
Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4/8xFE Installation and Configuration Guide 6-4 OL-7826-05 Dual Link: Single SCE 2000 T opologies In this topology , one SCE 2000 is connected to two full duplex, FE links.
Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 6-5 • FE-2 NET : Casca.
Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4/8xFE Installation and Configuration Guide 6-6 OL-7826-05 Figure 6-4: Cabl ing.
Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 6-7 T o cable the SCE 20.
Chapter 6 Cabling the Line Ports and Completing the Installation Connecting the line ports to the network Cisco SCE 2000 4/8xFE Installation and Configuration Guide 6-8 OL-7826-05 V iewing the Counter.
Chapter 6 Cabling the Line Ports and Completing the Installation Installing a Cascaded System Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 6-9 In packets discarded: 0 In packe.
Chapter 6 Cabling the Line Ports and Completing the Installation Installing a Cascaded System Cisco SCE 2000 4/8xFE Installation and Configuration Guide 6-10 OL-7826-0 5 Step 9 Connect the traffic por.
Chapter 6 Cabling the Line Ports and Completing the Installation Installing a Cascaded System Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 6-11 T o configure the connection mo.
Chapter 6 Cabling the Line Ports and Completing the Installation Installing a Cascaded System Cisco SCE 2000 4/8xFE Installation and Configuration Guide 6-12 OL-7826-0 5 • Sniffing — allows the SCE platform to forward traf fic on the specified link through the bypass mechanism while still analyzing the traffic passively .
Chapter 6 Cabling the Line Ports and Completing the Installation Loading and Activating a Service Control Ap plicati on Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 6-13 T o view the current link mode, use the following command: From the SCE 2000 # prompt, type show interface linecard 0 link mode and press Enter .
.
Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 7-1 This chapter describes how to start up the SCE 2000 platform, reboot, and shutdown.
Chapter 7 Basic SCE 2000 Platform Operations S tarting the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide 7-2 OL-7826-05 • SCE 2000 platform is connected to at least on.
Chapter 7 Basic SCE 2000 Platform Operations S tarting the SCE 2000 Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 7-3 If the system does not complete each of the st eps in the startup procedure, proceed to T r oubleshooting (on page 8-1 ) for troubleshooting recommendations and procedures.
Chapter 7 Basic SCE 2000 Platform Operations Managing SCE 2000 Confi gurations Cisco SCE 2000 4/8xFE Installation and Configuration Guide 7-4 OL-7826-05 Logger device U ser-File-Lo g counters: Total i.
Chapter 7 Basic SCE 2000 Platform Operations Managing SCE 2000 Confi gurations Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 7-5 flow-aging defa ult-timeout UDP 60 interface FastEthe rnet 0/0 ip address 10.
Chapter 7 Basic SCE 2000 Platform Operations Managing SCE 2000 Confi gurations Cisco SCE 2000 4/8xFE Installation and Configuration Guide 7-6 OL-7826-05 snmp-server com munity “pub lic” ro snmp-server hos t 10.
Chapter 7 Basic SCE 2000 Platform Operations Performing Complex Configur ations Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 7-7 Note that you cannot undo the configuration restore command. Step 3 Ty p e copy tffs0:system/prevconf/config.
Chapter 7 Basic SCE 2000 Platform Operations Displaying the SCE Platform V ersion Inform ation Cisco SCE 2000 4/8xFE Installation and Configuration Guide 7-8 OL-7826-05 Displaying the SCE Platform V e.
Chapter 7 Basic SCE 2000 Platform Operations Displaying the SCE Platform Inventory Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 7-9 Platform: SCE 2 000 - 4xGBE Management agen t interface version: SCE Agent 3.0.5 Build 18 Software packag e file: ftp://vk:vk@10.
Chapter 7 Basic SCE 2000 Platform Operations Displaying the System Uptime Cisco SCE 2000 4/8xFE Installation and Configuration Guide 7-10 OL-7826-0 5 Displaying the System Uptime Use this command to see how long the system has been running since the last reboot.
Chapter 7 Basic SCE 2000 Platform Operations Rebooting and Shutting Do wn the SCE Platform Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 7-11 Shutting Down the SCE Platform Shutting down the SCE platform is required before turning the power of f.
.
Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 8-1 Y our SCE 2000 platform went through extensive testing before leaving the factory . However , if you encounter problems starting it, use the information in this chapter to help isolate the cause of the problems.
Chapter 8 T roubleshooting T roubleshooting T ools Cisco SCE 2000 4/8xFE Installation and Configuration Guide 8-2 OL-7826-05 The following table shows the general troubleshooting strategy described in th is chapter .
Chapter 8 T roubleshooting T roubleshooting T ools Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 8-3 • Boot system <filename> — Specifies and verifies the package file to be installed. Error messages or other output iden tify problems with the package file.
Chapter 8 T roubleshooting T roubleshooting T ools Cisco SCE 2000 4/8xFE Installation and Configuration Guide 8-4 OL-7826-05 Following is a sample output from the show interface command.
Chapter 8 T roubleshooting T roubleshooting T ools Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 8-5 Copying the User Log Y ou can view the log file by copying it to an external source or to disk. This command copies both log files to the local SCE platform disk or any external host running a FTP server .
Chapter 8 T roubleshooting T roubleshooting T ools Cisco SCE 2000 4/8xFE Installation and Configuration Guide 8-6 OL-7826-05 Step 2 The system asks Are you sure? Step 3 Ty p e Y and press Enter .
Chapter 8 T roubleshooting T roubleshooting T ools Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 8-7 Generating a File for T echnical Support In order for technical support to be most ef fective, the user should provide them with the information contained in the system logs.
Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4/8xFE Installation and Configuration Guide 8-8 OL-7826-05 SCE 2000 Operational Status Description Status LED St.
Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 8-9 • When all LEDs come on to indicate that the sy stem has booted successfully , the initial system banner should be displayed on the cons ole screen.
Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4/8xFE Installation and Configuration Guide 8-10 OL-7826-0 5 Faulty power supply. If the system still fails to come up when the power supply is connected to a differe nt power source with a new powe r cable, the power supply unit is probably faulty.
Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 8-11 Symptom Possible Caus e Possible Solution Returned error is: Error—File <file name> does not exist The package fi le does not exist in the specified location.
Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4/8xFE Installation and Configuration Guide 8-12 OL-7826-0 5 T able 8-6 T r oubleshooti ng the Mana gement Subsy.
Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 8-13 CLI comman d : show telnet sessions Too many Tel net connections (up to 5 concurrent sess ions are supported).
Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4/8xFE Installation and Configuration Guide 8-14 OL-7826-0 5 • Peer does not receive traffic from SCE 2000 (FE.
Chapter 8 T roubleshooting Problem Solving Using a Subs ystems Approa ch Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 8-15 Auto-negotiation is disabled at the SCE 2000 but enabled at peer. Check auto-nego tiatio n configuration in the SCE 2000 and in pe er.
.
Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 I-1 A Airflow • 4-3 Attaching a Chassis Ground Connection • 4- 10 Attaching the Brackets to the SCE 2000 • 4- 7 Attaching th.
Index Cisco SCE 2000 4/8xFE Installation and Configuration Guide I-2 OL-7826-05 G General Overview • 1-1 Generating a File for Technical Support • 8- 7 I Identifying Startup Problems • 8-8 Initi.
Index Cisco SCE 2000 4/8xFE Installation and Configuration Guide OL-7826-05 I-3 Single Link Inline Topology • 3-4, 6-2 Receive-only Topology • 3-5, 6-3 Single SCE 2000 Topologies • 3-4 Site Requ.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Cisco Systems SCE 2000 4/8xFE è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Cisco Systems SCE 2000 4/8xFE - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Cisco Systems SCE 2000 4/8xFE imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Cisco Systems SCE 2000 4/8xFE ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Cisco Systems SCE 2000 4/8xFE, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Cisco Systems SCE 2000 4/8xFE.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Cisco Systems SCE 2000 4/8xFE. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Cisco Systems SCE 2000 4/8xFE insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.