Manuale d’uso / di manutenzione del prodotto OL-4858-07 del fabbricante Cisco Systems
Vai alla pagina of 36
CHAPTER 6-1 Multiprocessor WAN Application Module User Guide OL-4858-07 6 Command Reference This chapter lists new and re vised commands specif ic to the MW AM conf iguration. The commands are categorized according to the console from which the y are executed.
6-2 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Processor Control Commands Processor Control Commands The Processor Control (PC) commands are av ailable when you session into MW AM processor 1 from the Supervisor console.
6-3 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Command Details mwam module allowed-vlan T o conf igure the Ethernet connectivity from the backplane (i.e., switch fabric) to the indi vidual processors on the MW AM, use the mwam module allowed-vlan command in global conf iguration mode.
6-4 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details mwam module vlan-based T o assign MW AM traff ic to a VLAN QoS policy , use the mwam module vlan-based command in global conf iguration mode. T o remove this conf iguration, use the no form of the command.
6-5 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details session slot T o establish a command session to a processor on an MW AM, use the session slot command in privile ged EXEC mode.
6-6 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Tue Oct 14 11:04:43 EDT 2003 Copyright (c) 2002-2003 by cisco Systems, Inc. All rights reserved. Kernel 2.4.10.komodo on an i686 login: root Password: SVCMWAM Image version 2.
6-7 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show mwam module T o display connectivity information about the indi vidual processors on the MW AM, use the show mwam module command in pri vileged EXEC mode.
6-8 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Last clearing of "show interface" counters never Input queue: 0/2000/0/0 (size/max.
6-9 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Administrative Trunking Encapsulation: dot1q Operational Trunking Encapsulation: dot1q Negot.
6-10 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details mwam bootflash access Note The MW AM bootf lash access must be enabled if you want to operate in Supervisor mode.
6-11 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details logging listen mwam T o conf igure MW AM logging input to the Supervisor from an MW AM in the chassis, use the logging listen mwam command in global conf iguration mode.
6-12 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details The port numbering pattern is important if you are conf iguring other UDP ports on either the Supervisor or the MW AM processor .
6-13 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details execute-on T o initiate a remote command request on an MW AM processor from the Supervisor console, use the execute-on command in pri vileged EXEC mode.
6-14 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details T o terminate a remote command that is in progress, the user can activ ate the escape sequence def ined on the Supervisor console.
6-15 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details mwam module cpu logging T o conf igure the severity le vel of MW AM logging information to send to the Supervisor module, use the mwam module cpu logging command in global conf iguration mode.
6-16 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details The following e xample allows the Supervisor console to display deb ugging log messages rec.
6-17 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show logging T o display the slav e log options that are enabled on the MW AM, use the show logging command in privile ged EXEC mode.
6-18 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details Field descriptions for the output of this command are listed below: Activ e Processor is operational and remote console/logging is acti ve. Online Processor is operational but remote console/logging is not acti ve.
6-19 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details clear logging slot T o clear the slav e log options that are enabled on the MW AM, use the clear logging slot command in privile ged EXEC mode.
6-20 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show processor T o show status information about an MW AM processor, use the sho w processor command av ailable at the PC complex (processor 1 on the MW AM).
6-21 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details 0% CPU Utilization Messages 4115/4115 VRTC Update(s) acked by PC 244528/244528 Heartbeats(s.
6-22 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show log T o show the upgrade or restart logs, use the sho w log command av ailable at the PC complex (processor 1 on the MW AM). show log { upgrade | r estart } Syntax Description Defaults There are no default beha vior or values.
6-23 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details reload T o reload processors on an MW AM, use the reload command a vailable at the PC complex (processor 1 on the MW AM).
6-24 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details recover-ios T o set the conf iguration register to boot with a clean conf iguration, use the reco ver-ios command av ailable at the PC complex (processor 1 on the MW AM).
6-25 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details normal-ios T o set the conf iguration register to boot with a normal conf iguration, use the normal-ios command av ailable at the PC complex (processor 1 on the MW AM).
6-26 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show images T o list the images stored on the MW AM, use the show images command available at the PC comple x (processor 1 on the MW AM). show images Syntax Description This command has no arguments or k eywords.
6-27 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details restore T o restore the pre viously loaded IOS image and ROM-Monitor image, use the r estore command av ailable at the PC complex (processor 1 on the MW AM).
6-28 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show tech-support T o display general information about the MW AM and its processors when it reports a problem, use the show tech-support command a vailable at the PC complex (processor 1 on the MW AM).
6-29 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show version T o display information about the currently loaded software version along with hardw are and device information, use the show version command a vailable at the PC comple x (processor 1 on the MW AM).
6-30 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details mwam config-mode T o set the MW AM conf iguration f ile storage mode, use the mwam conf ig-mode command in privileged EXEC mode from the MW AM console.
6-31 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show mwam config-mode T o sho w the MW AM conf iguration f ile storage mode, use the show mwam conf ig-mode command in privile ged EXEC mode. show mwam conf ig-mode Syntax Description Defaults There are no default beha vior or values.
6-32 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details logging main-cpu T o conf igure MW AM log redirection to the Supervisor for all ev ents up to a maximum specif ied log lev el, use the logging main-cpu command in global conf iguration mode.
6-33 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details When selecting the UDP port for an MW AM processor , you are def ining a base UDP port used at the Supervisor . T wo additional source ports, based on the selected port, are then automatically def ined.
6-34 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details show mwam T o show MW AM T ransation Look-aside Buf fers (TLBs) and cache errors, use the show mwam command in privile ged EXEC mode. show mwam Syntax Description Defaults There are no default beha vior or values.
6-35 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details 0x21480000:0x214FFFFF 0x001480000:0x0014FFFFF CacheMode=5, RO, Valid 0x21500000:0x2151FFFF .
6-36 Multiprocessor WAN Application Module User Guide OL-4858-07 Chapter 6 Command Reference Command Details.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Cisco Systems OL-4858-07 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Cisco Systems OL-4858-07 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Cisco Systems OL-4858-07 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Cisco Systems OL-4858-07 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Cisco Systems OL-4858-07, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Cisco Systems OL-4858-07.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Cisco Systems OL-4858-07. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Cisco Systems OL-4858-07 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
