Manuale d’uso / di manutenzione del prodotto INTIMIDATOR SCAN LED 300 del fabbricante Chauvet
Vai alla pagina of 20
User Manual.
CHAUVET®, 2010, All Rights Reserved Information and specifications in this User Manual are s ubject to change without notice. CHAUVET® assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. Author: Anthony Chiappone Revision: 01 Release Date: 10-08-2 010 T ABLE OF C ONTENTS 1.
1. Before You Begin 3 10/25/2010 10:23 AM 1. B EFORE Y OU B EGIN What is included • 1 x Intimidator™ Scan LED 300 • 1 x Mounting bracket kit • 1 x Power Cord • 1 x Warranty Card • 1 x User.
1. Before You Begin 4 10/25/2010 10:23 AM Safety Instructions • Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet.
2. Introduction 5 10/25/2010 10:23 AM 2. I NTRODUCTION Product Dimensions.
2. Introduction 6 10/25/2010 10:23 AM Product Overview Bracket Adjustment Knob DMX In DMX Out Power Out Fuseholde r Power In Voltage Selection Switch (115/230 V AC) Safety.
3. Setup 7 10/25/2010 10:23 AM 3. S ETUP AC Power This fixture is switchable and runs on either 115 VAC, 60 Hz or 230 VAC, 50 Hz power. Before powering on the unit, make sure the line voltage to which you are connecting it matches the current setting on the voltage selection switch.
3. Setup 8 10/25/2010 10:23 AM Mounting Orientation The Intimidator™ Scan LED 300 may be mounted in any position provided there is adequate room for ventilation. Rigging Be sure that the structure can support the wei ght of the fixture. Pl ease see the “Technical Specifications” section of this m anual for a detailed weight listing.
4. Operating Instructions 9 10/25/2010 10:23 AM 4. O PERATING I NSTRUCTIONS Using the Control Panel Access control panel functions using the four butto ns located directly underneath the LED display on the included wired remote.
4. Operating Instructions 10 10/25/2010 10:23 AM Operation DMX Operation This is the operating mode which will allow for c ontrol with an external DMX controller.
4. Operating Instructions 11 10/25/2010 10:23 AM Sound-Active This fixture has a preprogramme d, sound triggere d chase. Access this via the control panel on the front of th e fixture. Adjust the microphone s ensitivity from the control panel. Please see the char t below for further explanation.
4. Operating Instructions 12 10/25/2010 10:23 AM DMX Channel Values 11-CH Mode C HANNEL V ALU E F UNCTION C HANNEL V ALUE F UNCTION 1 000 Ù 255 Pan 0°~180° 7 000 Ù 015 016 Ù 127 128 Ù 239 240 Ù.
4. Operating Instructions 13 10/25/2010 10:23 AM 7-CH Mode C HANNEL V ALU E F UNCTION C HANNEL V ALUE F UNCTION 1 000 Ù 255 Pan 0°~180° 6 000 Ù 015 016 Ù 127 128 Ù 239 240 Ù 255 Gobo Rotation S.
5. Appendix 14 10/25/2010 10:23 AM 5. A PPENDIX General Troubleshooting S YMPTOM P OSSIBLE C AUS E ( S ) P OSSIBLE A CTION ( S ) Breaker/Fuse keeps blowing • Excessive circuit load • Check total load placed on the electrical circuit.
5. Appendix 15 10/25/2010 10:23 AM DMX Primer There are 512 channels in a DMX connection. A fixt ure capable of receiving DMX will require one or a number of sequential channels. The user must assign a starting address on the fi xture that indicates the first channel reserved in the cont roller.
5. Appendix 16 10/25/2010 10:23 AM Cable Connectors Cabling must have a male XLR connector on one end and a female XLR connector on the other end. Do not allow contact be twe en the common and the fixture’s ch assis ground. Grounding the common can caus e a ground loop, and y our fixture may perform erra tically.
5. Appendix 17 10/25/2010 10:23 AM 3-Pin to 5-Pin Conversion Chart If you use a controller with a 5-pin DMX output connector, you will ne ed to use a 5-pin t o 3-pin adapter.
5. Appendix 18 10/25/2010 10:23 AM General Maintenance To maintain optimum performance and minimize wear, fixtures should be cleaned frequently. Usage and environment are contributing factors in determining frequency. As a general rule, fixtures should be cleaned at least twice a month.
T ECHNICAL S PECIFICATIONS WEIGHT & DIMENSIONS Length .............................................................................................................. 11 in (27 9 mm) Width ............................................................
C ONTACT U S World Wi de General Information CHAUVET® 5200 NW 108 th Ave Sunrise, FL 33351 voice: 954.929.1115 fax: 954.929.5560 toll free: 800.762.1084 Technical Support CHAUVET® 5200 NW 108 th Ave Sunrise, FL 33351 voice: 954.929.1115 (Press 4) fax: 954.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Chauvet INTIMIDATOR SCAN LED 300 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Chauvet INTIMIDATOR SCAN LED 300 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Chauvet INTIMIDATOR SCAN LED 300 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Chauvet INTIMIDATOR SCAN LED 300 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Chauvet INTIMIDATOR SCAN LED 300, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Chauvet INTIMIDATOR SCAN LED 300.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Chauvet INTIMIDATOR SCAN LED 300. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Chauvet INTIMIDATOR SCAN LED 300 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
