Manuale d’uso / di manutenzione del prodotto A92860GNX0 del fabbricante AEG
Vai alla pagina of 28
A92860GNX0 EN FREEZER USER MANUAL.
FOR PERFECT RESULTS Thank you for choosing th is AEG product. We have created it to give you impe ccable performance for many years, with innovative techno logies that help make life simpler – features you mi ght not find on ordinary appliances. Please spend a fe w minutes reading to get the very best from it.
CONTENTS 4 Safety information 6 Control panel 10 Ice dispenser 12 First use 12 Daily use 14 Helpful hints and tips 15 Care and cleaning 16 What to do if… 19 Technical data 19 Installation 23 Noises .
SAFETY INFORMATIO N In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings.
– thoroughly ventilate the room in which the appliance is situated • It is dangerous to alter the specifications or modify this product in any wa y.
• Never use a hair drier or other heating appliances to speed up defrosting. Excessive heat may damage the plastic interior, and humidity could enter the electric system making it live. Installati on For electrical connection carefully follow the instructions given in specific paragraphs.
2 Mode button 3 OK button 4 Temperature colder button 5 Temperature warmer button 6 Display It is possible to change predefined sound of buttons to a loudly one by press ing together Mode button and Temperature colder button fo r some seconds. Change is reversible.
The temperature indicator shows the set temperature. The set temperature will be reached within 24 hours. After a power failure the set temperature remains stored. Ice maker function The Ice maker is switched on at delivery and starts up automatically when the appliance is connected to water and power supplies.
The Timer shows the set value (30 minutes) for a few seconds. 2. Press the Temperature colder button or the Temperature warmer b utton to change the Timer set value from 1 to 90 minutes. 3. Press the OK button to confirm. The Minute Minder indicator is shown.
Door open alarm An acoustic alarm will sound if the door is left open for a few minutes. The door open alar m conditions are indicated by: • flashing alarm indicator • acoustic buzzer. When normal conditions are restored (door closed), the alarm will stop.
Permanent unlocking Press buttons 2 and 3 at the same time for about three seconds. The button 2 or 3 lights up to indicate unlocking and the child lock indicator (1) goes o ut. To activate the child lock function Press buttons 2 and 3 at the same time for about three seconds.
FIRST USE Cleaning the interior Before using the appliance for the first time, wash the interior and all internal access ories with lukewarm water and some neutral soap so as to remove the typ ical smell of a brand - new product, then dry thoroughly. Do not use detergents or abrasive powders, as these will damage the finish.
In the event of accidental defrosting, for example due to a power failure, if the power has been off for longer that the value shown in the technical characteristics chart under "rising time", the defrosted food must be consumed quickly or cooked immediately and then re - frozen (after cooling).
Removal of freezing ba skets from the freezer The freezing baskets have a limit stop to prevent their accidental removal or falling out. At the time of its removal from the freezer, pull the basket to- wards yourself and, upon reaching the end point, remove the basket by tilting its front upwards.
• not open the door frequently or leav e it open longer than absolutely necessary. • Once defrosted, food deteriorates rapidly and cannot be refrozen. • Do not exceed the storage period indicated by the food manufacturer. CARE AND CLEANING CAUTION! Unplug the appliance before carrying out any maintenance operation.
Cleaning the ventilation grill e The ventilation grille can be removed for washing. Make sure the door is open and then: 1. Loosen the upper edge of the grille by pulling outward/downward. 2. Pull the grille straight out to completel y remove it. 3. Vacuum clean under the cabinet.
Problem Possible cause Solution The appliance is noisy. The appliance is not supported properly. Check if the appliance stands sta- ble (all feet and wheels should be on the floor). Refer to "Levelling". A rattling noise. The ice being stirred to prevent it from freezing together.
Problem Possible cause Solution The appliance does not operate. The appliance is switched off. Switch on the applianc e. The mains plug is no t connected to the mains socket correctly. Connect the mains plug to the mains sock et correc tly. The appliance has no power.
TECHNICAL DATA Dimension Height 1810 mm Width 595 mm Depth 650 mm Rising Time 10 h Voltage 230 V Frequency 50 Hz The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label.
Location To ensure best performance, if the appliance is positioned below an overhanging w all unit, the minimum distance between the top of the cabinet and the wall unit must be at least 40 mm . Ideally, however, the appliance should not be posi tioned below overhanging wall units.
1 Green and Yellow: Earth 3 Brown: Live 5 Blue: Neu tral As the colours of the wires in the mains lead of this appliance may not cor respond with the coloured markings identifying the terminals in your plug, proceed as follo ws: 1.
Install two spacers on the back side of the panel and two spacers with adhesive on the lower part. Fitting the door handles (Example for right hinge performance) The handles are supplied as a kit at delivery. 1. Screw the top handle bracket to the handle rod.
Levelling When placing the appliance ensure that it stands level. If necessary adjust the feet using the adjust- ment spanner supplied. Door alignment is dependent on proper levelling. Starting the ice maker for the first time. Ensure proper connection to the water supply, refer to "Connecting the water hose".
CLICK! CLICK! BRRR! BRRR! BLUBB! BLUBB! HISSS! HISSS! 24 Noises.
SSSRRR! SSSRRR! CRACK! CRACK! ENVIRONMENTAL CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment.
26.
27.
www.aeg.com/shop 855813201 - A - 132011.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il AEG A92860GNX0 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del AEG A92860GNX0 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso AEG A92860GNX0 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul AEG A92860GNX0 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il AEG A92860GNX0, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del AEG A92860GNX0.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il AEG A92860GNX0. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo AEG A92860GNX0 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
