Manuale d’uso / di manutenzione del prodotto EHT602D del fabbricante Zenoah
Vai alla pagina of 16
GB-1 G B eHT752S / eHT602D eHT752S eHT602D G B OWNER’S MANUAL HEDGE TRIMMER 848D3M93A1 (712).
GB-2 eHT752S / eHT602D EXPLANA TION OF SYMBOLS AND SAFETY W ARNINGS 21.7 cm 3 21.7 cm 3 MODEL SOUND LEVEL VIBRA TION LEVEL ISO 10884 LwA measured 104.5 dB(A) 107.
GB-3 G B eHT752S / eHT602D SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern cr itical points which must be taken into consideration to pre v ent possible serious bodily injury , and f or this reason y ou are requested to read all such instructions carefully and f ollow them without f ail.
GB-4 eHT752S / eHT602D 2. Specification Model ........................................................................................... eHT752S / eHT602D Ty pe .........................................................................................
GB-5 G B eHT752S / eHT602D 3. W ar ning labels on the machine 4. Symbols on the machine If warning label peels off or becomes soiled and impossible to read, you should contact the dealer from which you pur chased the product to order new labels and af fix them in the r equired location(s).
GB-6 eHT752S / eHT602D 2. Never use the product, a. when the ground is slippery or when you can’t maintain a steady posture. b. At night, at times of heavy fog, or at any other times when your field of vision might be limited and it would be diffi- cult to gain a clear view of the working area.
GB-7 G B eHT752S / eHT602D BEFORE ST ARTING THE ENGINE 1. The area within a perimeter of 15 m of the person using the product should be consider ed a hazardous ar ea into which no one should enter . If necessary , yellow warning rope, warning signs should be placed around the pe- rimeter of the area.
GB-8 eHT752S / eHT602D • IF SOMEONE COMES 1. Guard against hazar dous situa- tions at all times. W arn adults to keep pets and children away fr om the area.
GB-9 G B eHT752S / eHT602D ■ RECOMMENDED MIXING RA TIO GASOLINE 50 : OIL 1 (when using ZENOAH genuine oil) • Exhaust emission are controlled b y the funda- mental engine parameters and components (eq.
GB-10 eHT752S / eHT602D ST ARTING ENGINE W ARNING The cutting head will start moving upon the engine starts. 1. Feed fuel into the fuel tank and tighten the cap se- curely . 2. Rest the unit on a flat, firm place. Keep the cutting head off the gr ound and clear of surr ounding objects as it will start moving upon star ting of the engine.
GB-11 G B eHT752S / eHT602D CUTTING WORK W ARNING • W eather conditions and altitude may effect carburation. • Do not allow an y one to stay c lose to the hedge- trimmer while working or while adjusting the car - b uretor .
GB-12 eHT752S / eHT602D 8. Maintenance (1) Bolt (2) Plate (3) Spacer (4) Nut Every Every Ever y 25 50 100 System/components Procedure Before hours hours hours Note use after after after fuel leaks, fu.
GB-13 G B eHT752S / eHT602D 8. Maintenance (1) Safety lock SAFETY LOCK W ARNING • Stop operation when the safety lock is de- fective. • Safety lock is the device not to accelerate the throttle lever without intention. While pushing the safety lock, you can accelerate the throttle lever .
GB-14 eHT752S / eHT602D 8. Maintenance ADJUSTING CARBURETOR The carburetor has been adjusted at the factory . Should your unit need readjustment due to the changes in alti- tude or operating conditions, please let your skillful dealer make the adjustment.
GB-15 G B eHT752S / eHT602D PROCEDURES TO BE PERFORMED AF- TER EVER Y 100 HOURS OF USE 1. Remove the muffler , insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylin- der exhaust port at the same time.
GB-16 eHT752S / eHT602D Limited warranty Should any failure occur on the pr oduct under normal operating conditions within the applicable warranty pe- riod, the failed part will be replaced or repair ed fr ee of charge by a ZENOAH authorized dealer .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Zenoah EHT602D è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Zenoah EHT602D - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Zenoah EHT602D imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Zenoah EHT602D ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Zenoah EHT602D, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Zenoah EHT602D.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Zenoah EHT602D. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Zenoah EHT602D insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
