Manuale d’uso / di manutenzione del prodotto RCS 2.2 XP del fabbricante TacT Audio
Vai alla pagina of 50
Owner ’ s Manual RCS 2.2 XP Preamplifi er / Dynamic Room Correction System.
.
3 T ac t Audio W ARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: T O REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER-SER VICEABLE P ARTS INSIDE.
CAUTION CAUTION 4 T ac t Audio 1. Read these instructions entirely bef ore installing or operating this equip- ment. 2. Keep these instructions. 3. Heed all warnings. 4. D o not use this equipment near water or allow it to become wet. 5. D o not block any ventilation openings.
5 T ac t Audio IMPORT ANT! Please recor d your serial number here for future r eference. Y ou will need this for future upgrades or should y ou ever require service on your RCS 2.
CAUTION CAUTION 6 T ac t Audio T ABLE OF C ONTENTS Safety instructions 4 Acknowledgments/Registration 5 Unpacking the RCS 2.2X 7 Introduction 8 CAUTION CAUTION CAUTION Introduction 8 CAUTION CAUTION CAUTION Dynamic Room C orrection 10 Automatic Room C or rection 12 Connecting the RCS 2.
7 7 7 T ac t Audio T ac t Audio T ac t Audio U NP A CKING T HE RCS 2.2 XP Carefully remove the RCS 2.2 XP and accessor y k it from the car ton and visually check for shipping damage . C ontac t both the shipper and T acT Audio immediately if the unit show s any sig n of damage fr om rough handling.
CAUTION CAUTION 8 T ac t Audio INTRODUC TION Room Correction System Congratulations on your purchase of your RCS 2.2 XP . Y ou have now acquired the most advanced stereo Preamplifi er / Room Correction System ever developed! The RCS 2.2 XP has four times the processing power of the famous T acT RCS 2.
9 T ac t Audio Modular design T rue Upgradeability The internal layout of the RCS 2.2 XP is completely modular . All of the expensive components such as DSP’s, D/A and A/D converters are a plug-in type and are placed on a motherboard. This allows for easy and inexpensive future upgrades.
CAUTION CAUTION 10 T ac t Audio D YNAMIC ROOM C ORREC TION Dynamic Room Correction (DRC) ® is new technology developed by T act Audio Inc. over past two years. This groundbreaking brings the science and art of Room Correction, and specifi cally T act room correction products, to yet another level.
1 1 T ac t Audio T raditional T act room correction systems use one target curve that allows for full range 20-20,000 Hz room corrections. Once selected, the same target curve (same set of correction fi lters) was used at all listening levels.
CAUTION CAUTION 12 T ac t Audio A UT OMA TIC ROOM C ORREC TION T act-2.2 XP can now perform room correction automatically from the 2.2 XP front panel user interface, without the need for an PC software. The automatic room correction feature is designed to perform the entire room cor- rection process without using a PC interface.
13 T ac t Audio This operating mode assumes a stereo system consisting of two main channels and two subwoofers. T o select 2.2 mode from the main screen, click on the MENU button, and then select the MODE menu. In MODE menu, click on the STEREO 2.2 option.
CAUTION CAUTION 14 T ac t Audio Fig. 4. Crossover menu. CRO: OFF indicates that crossover fi lters are disabled Crossover fi lters can be turned OFF from the front panel crossover menu (Fig. 4). Place the screen cursor over the CRO: ON menu option and then press the enter button (click) until it displays CRO: OFF , and then click on SET option.
15 T ac t Audio DELA Y . If you do not want to be in the room while measurement is in progress, set this parameter to a few seconds to allow you to exit the room. For example, if DELA Y = 10 the system will wait for 10 seconds before it starts pulsing.
CAUTION CAUTION 16 T ac t Audio 4. Enable automatic room correction. In the DRC-RCS screen (Fig. 3), select correction preset 1. Make sure that crossover fi lters are enabled and proper crossover frequency is selected. Crossover fi lters can be adjusted at any time even after you enable the automatic feature.
17 T ac t Audio This operating mode assumes a stereo system consisting of two main channels and one subwoofer . T o select 2.1 mod from the main screen, click on the MENU button to enter the main menu screen and then select th e MODE menu. In the MODE menu click on the STEREO 2.
CAUTION CAUTION 18 T ac t Audio 2.0 Mode This operating mode assumes a stereo system consisting of two main channels only . T o select 2.0 mode from the main screen, click on the MENU button to enter main menu screen and then select the MODE menu. In the MODE menu click on STEREO 2.
19 T ac t Audio.
CAUTION CAUTION 20 T ac t Audio RCS 2.2 XP C ONNEC TIONS Digital input The RCS 2.2 XP has 5 digital inputs: • 3 S/PDIF (RCA) • 1 AES/EBU (XLR) • 1 Optical ( T osLink) Optical ( T osLink) Optical.
21 T ac t Audio Digital output 2 subwoof ers The RCS 2.2XP has three digital outputs f or subwoofer(s) : • 1 S/PDIF (RCA) • 1 AES/EBU (XLR) • 1 Optical ( T osLink) Optical ( T osLink) Optical ( T All outputs are 24-bits at 44.1, 48, 88, 96 or 192 kHz sampling rates.
CAUTION CAUTION 22 T ac t Audio Analog input (optional ADC module) Analog output main channels (optional DA C module) The RCS 2.2 XP has 2 stereo analog outputs for the main channels when the op- tional DA C-MAIN module is installed: • 1 analog stereo single ended (RCA) • 1 analog stereo balanced (XLR) RCS 2.
23 T ac t Audio Analog output subwoof er(s) (optional DA C module) Microphone input RCS 2.2X Connections The RCS 2.2 XP has 2 analog outputs for subwoofer(s) when the optional DAC- SUB module is installed: • 1 analog stereo single ended (RCA) • 1 analog stereo balanced (XLR) NOTE: The optional DAC module is r equired for analog outputs.
CAUTION CAUTION 24 T ac t Audio RS232 interface ports The RCS 2.2 XP has two RS232 interface por ts: • INPUT • A UX Use the “ INPUT ” port for communication with your personal computer . CAUTION CAUTION CAUTION port for communication with your personal computer .
25 T ac t Audio FRONT P ANEL CONTROLS Standby Use the “ ST ANDBY ” button to toggle between Standb y mode and ON. The display will indicate Standby mode by displaying a small green light in the lef t side of the display . When the unit is placed in Standby mode all user settings are saved .
CAUTION CAUTION 26 T ac t Audio The remote c ontrol is used to access the front panel displa y controls and menus. REMO TE C ONTROL CAUTION CAUTION CAUTION 4 11 2 9 1 3 5 6 7 10 8 12.
27 T ac t Audio 1 - ST ANDBY The ST ANDBY button will either turn the RCS 2.2 XP on or will place it int standby mode. When in standby mode , the unit is placed into a low power “ idling” state. The standby button is also used t o save changes that were made in the menu parameters.
CAUTION CAUTION 28 T ac t Audio T o move the cursor indicator use the front panel or remote control navigation but- tons. T o selec t an option press the “ ENTER ” button.
29 T ac t Audio Master Level Indicator This fi eld displays the system master level in dB. I t is calculated as relative gain (displayed from 0 to 99.9) minus 99.9 plus GAIN (as set in t he OPTIONS menu). F or example, if the GAIN option is set to 3 dB and the fr ont pane l master level dis play reads 87.
CAUTION CAUTION 30 T ac t Audio Fr ont Panel > Main Menu The main menu screen lists all of the RCS 2.2 XP general menus. A ccess the main menu through the menu button on the front panel or the remote control. MAIN menu T o highlight a menu option use the navigational buttons .
31 T ac t Audio Fr ont Panel > Main Menu Use this menu to set the RCS 2.2 XP to one of four operating modes. MODE menu T o highlight an option use the navigational buttons. T o enter a highlighted option press the “ ENTER ” button. STEREO 2.2 This mode produces 4 output signals.
CAUTION CAUTION 32 T ac t Audio Fr ont Panel > Main Menu ADC menu (optional ADC module) NOTE: The optional ADC module is required for analog inputs. The RCS 2.2 XP can be equipped with a state of the art Analog to Digital C on- verter (ADC module optional) .
33 T ac t Audio Fr ont Panel > Main Menu The RCS 2.2 XP is equipped with a sample rate converter on each digital out- put. Each output can independently be set to 44.
CAUTION CAUTION 34 T ac t Audio Fr ont Panel > Main Menu POL menu The test menu is designed to allow for a quick system check. When engaged it will produce pink noise on all selected channels. When a channel is set to “ Y ” pink noise will be heard from that channel when “ Run T est ” is selected.
35 T ac t Audio Fr ont Panel > Main Menu The display menu allows for contr ol over the front panel display appearance. DISPLA Y menu T o select an option use the “ UP ” or “ DOWN ” navigational buttons and then use the “ LEFT ” and “ RIGHT ” buttons to change the value.
CAUTION CAUTION 36 T ac t Audio Fr ont Panel > Main Menu COMM menu Use this screen to set the 2.2 XP device address. This menu has only one option, A ddress . Address can be set to a ny number between 1 and 255. This parameter is used by PC programs to identify the 2.
37 T ac t Audio Fr ont Panel > Main Menu The AMP menu is designed to allow the RCS 2.2 XP to interface with the T acT line of digital amplifi ers. The RCS 2.2 XP can control multiple digital amplifi ers. This setting should be ENABLED only if you have a T ac t digital amplifi er attached to the RCS 2.
CAUTION CAUTION 38 T ac t Audio Fr ont Panel > Main Menu OPTIONS menu The options menu allows for control of the systems maximum signal level, signal detection threshold (SDTH), wheel speed, and remote control. T o select an option highlight it using the “ UP ” and “ DOWN ” navigational buttons.
39 T ac t Audio Fr ont Panel > Main Menu Use this screen lock certain areas of the front panel user interface. LOCK menu T o select an option highlight it using the “ UP ” and “ DOWN ” navigational buttons. T o modify a selected option use the “ LEFT ” and “ RIGHT ” buttons.
CAUTION CAUTION 40 T ac t Audio Fr ont Panel > Main Menu Use this screen to verify the versin of fi r m ware that is i nstalled on your RC S 2.2 XP .
41 T ac t Audio Fr ont Panel > Correction Menu Access the CORREC TION menu by selec ting DRC-RCS from the RCS 2.2 XP fi rst screen. CORRECTION menu T o highlight a menu option use the navigational buttons . T o enter a highlighted option press the “ ENTER ” button.
CAUTION CAUTION 42 T ac t Audio Fr ont Panel > Correction Menu Use th is menu to se t individual channel level settings. LEVELS menu Use the UP and DOWN buttons to place screen cursor on desired option and then use the LEFT and RIGHT buttons to adjust individual channel level set- tings.
43 T ac t Audio Fr ont Panel > Correction Menu Use this screen to vie w the s ymbolic names ass igned to each preset number . NAMES menu Use the UP and DOWN buttons to place the screen cursor on desired option. Pr ess the enter button to engage the selected correction preset.
CAUTION CAUTION 44 T ac t Audio Fr ont Panel > Correction Menu Use th is menu to per form room response measurments directly from the front panel, without a n ex ternal computer interface. MSR menu Y our Y our Y 2.2 XP is factory confi gured to measurement parameters as displayed above .
45 T ac t Audio Fr ont Panel > Correction Menu In most cases, factory presets are optimum and users can proceed directly with peforming actual measurements.
CAUTION CAUTION 46 T ac t Audio Fr ont Panel > Parametric EQ Menu > Parametric EQ Menu This menu is used to control the 12 band parametric equalized.
47 T ac t Audio P ARAMETRIC EQ menu When a Par Eq preset other that BP is selected this screen can have two forms: one with the LINK option set to YES and the other with the LINK option set to NO . When the LINK option is set to NO the following screen is displayed .
CAUTION CAUTION 48 T ac t Audio Fr ont Panel > Parametric EQ Menu > Parametric EQ Menu This is an example of the linked parametric EQ fi lter table. Its display allows for adjustment of all fi lter parameters: Level, center frequency and fi lter width given in oc taves .
49 T ac t Audio Fr ont Panel > Parametric EQ Menu P ARAMETRIC EQ menu The following is an example of an un-linked P arEQ table featuring the lef t chan- nel parametric EQ fi lter table.
T acT Audio, Inc. 201 Gates Road Unit G, Little Ferry – New Jersey 07643, USA Phone: +1 201 440 9300 – Fax: +1 201 440 5580 – Email: info@tactaudio.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il TacT Audio RCS 2.2 XP è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del TacT Audio RCS 2.2 XP - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso TacT Audio RCS 2.2 XP imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul TacT Audio RCS 2.2 XP ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il TacT Audio RCS 2.2 XP, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del TacT Audio RCS 2.2 XP.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il TacT Audio RCS 2.2 XP. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo TacT Audio RCS 2.2 XP insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
