Manuale d’uso / di manutenzione del prodotto KFN 14827 SDEed del fabbricante Miele
Vai alla pagina of 80
Operating and installation instructions Frost free fridge-freezer with PerfectFresh zone and ice cube maker KFN 14827 SDE ed/cs To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time.
Guide to the appliance .............................................5 Caring for the environment ..........................................7 Warning and Safety instructions .....................................8 How to save energy ....................
Adjusting the interior fittings .......................................3 2 Moving the shelves ................................................3 2 Split shelf ........................................................3 2 Freezing and storing food .......
Problem solving guide ............................................4 9 Noises .........................................................5 3 After Sales / Guarantee ............................................5 4 Mains water connection ..................
a On/Off sensor for the whole appliance and On/Off sensor for switching the PerfectFresh zone on and off separately b Super cool and Super freeze sensor c Sensor for setting a lower temperature ( X ) .
a Bottle rack b Adjustable shelf c Active charcoal filter holder d Control for setting the humidity in the PerfectFresh zone compartments e PerfectFresh zone compartments f Condensate channel and drai.
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and should be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children.
This appliance complies with all relevant legal safety requirements. Improper use can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and before using it for the first time.
Technical safety ~ Before setting up the appliance, check it for any externally visible damage. Do not install and use a damaged appliance. A damaged appliance is dangerous. ~ If the connection cable is faulty it must only be replaced by a service technician authorised by the manufacturer to protect the user from danger.
~ The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system which complies with current local and national safety regulations.
~ This appliance must not be used in a non-stationary location (e.g. on a ship). ~ In countries where there are areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the appliance and its surroundings in a clean condition at all times.
~ Do not use defrosting sprays or de-icers, as they might contain substances which could damage the plastic parts or which could cause a build-up of gases and pose a danger to health. ~ Do not use any oils or grease on the door seals, as these will cause the seals to deteriorate and become porous with time.
Normal energy consumption Increased energy consumption Installation site In a ventilated room. In an enclosed, unventilated room. Protected from direct sunlight. In direct sunlight. Not near to a heat source (radiator, oven). Near to a heat source (radiator, oven).
Before using for the first time Protective foil On stainless steel appliances, the outer surfaces are also covered with protective foil. ^ Do not remove the foil until the appliance has been positioned in its final location.
To enable the temperature to get sufficiently cold inside the appliance, allow the appliance to run for a few hours before placing food in it. Do not place food in the freezer section until the temperature is at least -18°C. To switch between the PerfectFresh zone and freezer section touch the relevant sensor.
^ Touch the On/Off sensor until the "PerfectFresh" symbol goes out. The interior lighting will not come on when you open the door and the PerfectFresh zone is switched off. The freezer section remains switched on and the "Freezer" symbol is lit up.
Settings mode Certain settings on the appliance can only be selected in the settings mode. How to select the settings mode and how to change the settings is described in the relevant section of these instructions.
Activating or deactivating the safety lock The safety lock can be activated to prevent the appliance being switched off inadvertently. ^ Touch and leave your finger on the X sensor. ^ At the same time, briefly touch the On/Off sensor (without letting go of the X sensor).
It is very important to set the correct temperature for storing food in the appliance. Micro-organisms will cause food which is not stored at the correct temperature to deteriorate rapidly. Temperature influences the growth rate of these micro-organisms.
– Each subsequent touch of a sensor: changes the setting incrementally. – Leaving a finger on the sensor: changes the setting continuously. Approx. 5 seconds after taking your finger off a sensor, the current setting of the PerfectFresh zone is automatically shown.
The temperature being set will flash in the display. The following information shows in the display when the sensors are touched: – Touching a sensor once: the last temperature selected flashes. – Each subsequent touch of a sensor: adjusts the temperature shown in 1 °C steps.
^ The temperature display brightness can now be changed by touching the X sensor: d0 : Maximum brightness d1 : Reduced brightness d –: Return to menu. The old setting lights up, and your newly selected setting flashes. ^ Touch the On/Off sensor to confirm the new setting.
Your appliance has been fitted with a warning system which ensures that the temperature in the appliance cannot rise unnoticed and to avoid energy being wasted if a door is left open. Activating the alarm system The alarm system is always active. It does not have to be switched on manually.
Door alarm The alarm will sound if a door is left open for more than approx. 2 minutes. The alarm off sensor will light up red and the symbol for the section which has the opened door will flash. The alarm will stop and the indicators will go out as soon as the door is closed.
Super cool The Super cool function can be used to rapidly reduce the temperature throughout the PerfectFresh zone to its lowest setting (depending on the room temperature). Switching on Super cool Super cool is particularly recommended for the faster chilling of large amounts of fresh food or drink.
Super freeze Switch the Super freeze function on before putting fresh food into the freezer section. This helps food to freeze quickly and retain its nutrients, vitamins, flavours and appearance. Super freeze is not necessary: – when placing food in the freezer that is already frozen.
Food is stored at a lower temperature in the PerfectFresh zone than in the refrigerator section. The humidity in the PerfectFresh zone compartment can also be regulated to suit the food being stored. Providing ideal storage conditions ensures that food stays fresh considerably longer while retaining both flavour and vitamins.
Food which is not suitable for storing in the refrigerator Not all food is suitable for storing in a refrigerator at temperatures below 5 °C, as some food is sensitive to cold. Cucumbers, for example, become glassy, aubergines bitter and potatoes sweet.
Please take into account that high humidity is only achieved and effective if the food is stored unwrapped or loosely wrapped . – The high humidity setting . is ideal for storing freshly harvested produce such as vegetables, salad, herbs, cabbage and home-grown seasonal fruit.
Can all types of food be stored together? Do not place all types of food together in one compartment. Some types of food do not store well together. Aromas and flavours can transfer from one type of food to another (e.g. carrots absorb the smell and flavour of onions very easily).
The following tips may help if you find that food you have stored does not keep well (e.g. food becomes limp or wilts after only being stored for a short time): ^ Only use the appliance for storing fresh food. The condition of the food when it is first placed in the appliance is an important factor in determining how long it stays fresh.
Moving the shelves The shelves can be adjusted according to the height of the food. ^ Raise the shelf, and pull it forwards slightly until the notch at the side is in line with the shelf support. It can then be raised or lowered to the required level.
PerfectFresh zone compartments The compartments in the PerfectFresh zone are on telescopic rails, and can be removed for filling, emptying or cleaning purposes. ^ Pull out the compartment as far as it will go, and then lift it up and out. Push the runners back in again to avoid injury or damage.
Maximum freezing capacity To ensure that fresh food placed in the freezer freezes through to the core as quickly as possible, the maximum freezing capacity must not be exceeded. The maximum freezing capacity for freezing within a 24-hour period is given on the data plate: "Freezing capacity .
Home freezing Only freeze fresh food which is in a good condition. Hints on home freezing – The following types of food are suitable for freezing: Fresh meat, poultry, game, fish, vegetables, herbs, fresh fruit, dairy products, pastry, leftovers, egg yolks, egg whites and a range of pre-cooked meals.
Before placing food in the freezer section ^ When freezing more than 2 kg of fresh food, switch on the Super freeze function for some time before placing the food in the freezer (see "Super freeze"). This also helps to prevent food that is already in the freezer from starting to defrost.
Defrosting Frozen food can be defrosted in different ways: – in a microwave oven, – in an oven using the "Fan" or "Defrost" setting, – at room temperature, – in the refrigerator (the cold given off by the frozen food helps to keep the other food cold), – in a steam oven.
Cool pack The cool pack prevents the temperature in the freezer rising too quickly in the event of a power cut. Place the cool pack in the top drawer of the freezer section, directly on top of the food. The cool pack will be at its most effective after it has been in the freezer for approx.
For the automatic ice cube maker to operate it must be connected to the mains water supply. Switching on the ice cube maker ^ Switch on the freezer section. ^ Pull out the ice cube drawer a little way. ^ Press the On/Off button a on the ice cube maker.
Switching off the ice cube maker The ice cube maker can be switched off independently of the freezer section if you do not want the appliance to make any ice cubes.
^ The length of the water intake time for the ice cube maker can now be adjusted by touching the X sensor: E1 : Shortest water intake time, E8 : Longest water intake time, E – : Return to menu. The old setting lights up, and your newly selected setting flashes.
PerfectFresh zone Condensate and frost can build up on the back wall of the PerfectFresh zone whilst in use. These are automatically removed and defrosted by the appliance. The condensate is drained away via a channel and drain hole into an evaporation system at the back of the appliance.
Make sure that no water can penetrate into the electronic unit or into the light. Do not let water get into the drainage channel and drain hole when cleaning. Do not use steam cleaning apparatus to clean the appliance. Steam could reach the electrical components and cause a short circuit.
Cleaning the interior and accessories ^ Clean the appliance at least once a month using lukewarm water and a little washing-up liquid. ^ Clean the interior shelves and drawers by hand. These are not suitable for cleaning in a dishwasher. ^ Clean the condensate channel and drain hole frequently, so that condensate can drain away unhindered.
Cleaning the ice cube tray Ice cubes freeze in the ice cube tray and then drop into the ice cube drawer below. Clean the ice cube tray regularly with warm water and a little washing-up liquid to remove residual ice and water. The ice cube tray cannot be removed and must be cleaned in situ.
If you have used a solution of water and washing-up liquid to clean it, discard the ice cubes from the first three ice cube making processes, as they are not suitable for consumption. Ventilation gaps ^ The ventilation gaps should be cleaned regularly with a brush or vacuum cleaner.
The active charcoal filters should be changed approx. every 6 months. When the Change active charcoal filter indicator lights up red, the active charcoal filters need to be changed. To change the active charcoal filters ^ Pull the active charcoal filter holder upwards to remove it from the shelf.
If you have delayed changing the active charcoal filters and the indicator is not lit up, you will need to reset the counter when you replace the active charcoal filters via the settings mode. ^ Touch and leave your finger on the X sensor. ^ At the same time, briefly touch the On/Off sensor (without letting go of the X sensor).
Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.
. . . the frozen food is thawing because the freezer section is too warm. Is the room temperature lower than the ambient temperature for which the appliance is designed? ^ If so, raise the temperature of the room.
..." dn " appears in the temperature display. The demonstration function is activated. ^ Call the Service Department. . . . you cannot switch the ice cube maker on. ^ Check whether the appliance is connected to the electricity supply. . . . the ice cube maker is not producing any ice cubes.
. . . the floor of the PerfectFresh zone is wet. The condensate drain hole is blocked. ^ Clean the condensate channel and drain hole. If you still cannot remedy the fault having followed these suggestions, please contact the Miele Service Department.
Normal noises What causes them Brrrrr... Humming noise made by the motor (compressor). This noise can get louder for brief periods when the motor is switching on. Blubb, blubb.... A gurgling noise can be heard when coolant is circulating through the pipes.
In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – Miele (see back cover for contact details). When contacting your Dealer or Miele, please quote the model and serial number of your appliance.
Notes on connecting to the mains water supply Connection to the mains water supply should only be carried out by a qualified and competent person in accordance with national and local regulations. The water quality must conform to the requirements for drinking water in the country the appliance is being installed in.
^ The stainless steel hose should be attached to the solenoid valve at the base of the appliance at the back. ^ Ensure that the hose is fitted correctly and that it is water tight. ^ Turn on the stopcock slowly and check the whole water system for leaks.
Electrical connection U.K. All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). The appliance is supplied with a mains cable and moulded plug ready for connection to an a.
Do not place any appliance which gives off heat, such as a toaster or microwave oven, on top of this appliance, as this would increase the appliance's energy consumption. This appliance has side-wall heating and can be installed side-by-side with another refrigeration appliance.
Ventilation Air at the back of the appliance gets warm. To ensure sufficient ventilation the air inlet and outlet must not be covered or blocked in any way. They should be dusted on a regular basis. Installation ^ Remove the cable clip from the back of the appliance.
Appliance dimensions ABC KFN 14827 SDE ed/cs 1850 mm 600 mm 630 mm Installation 60.
To avoid a build-up of condensation and resultant damage, refrigerators and freezers should not normally be installed side-by-side. However, this appliance has side wall heating, and can be installed side-by-side with certain other Miele appliances. Your dealer will be able to advise you on which models are suitable.
^ Close the doors to check whether the door handles are correctly aligned with one another. The top of both appliances must be the same height. If they are not, the covers will not fit properly. ^ Push the two appliances together, and align them again.
^ Position wide brackets j at the top and bottom on the back, and push the top bracket upwards until it is in the correct position (z). ^ Secure the brackets at the sides using hex screws k supplied. Do not drill holes for these screws in the appliance.
^ Push short trim m into the gap at the top of the appliances. Make sure that the gap in the trim faces the front. The trim must sit flush with the top of the appliances at the front. ^ Fit cover n in the space between the control panels. Make sure that the outer edges of the cover are flush with the control panels.
Stainless steel appliances (height adjustable door) The appliance door can be aligned retrospectively using the outer slots in the lower hinge plate: ^ Unscrew threaded pin d by one half of a turn using the allen key supplied. ^ Adjust the height of the hinge pin using the spanner supplied.
Important Do not change the door hinging if this appliance is to be installed "side-by-side" with another appliance. To change the door hinging you will need the following tools: – a cross-slotted screwdriver, – a flat-bladed screwdriver, – a selection of Torx screwdrivers, – a spanner.
Removing the soft-close mechanism for the upper door ^ Open the upper door. ^ Remove panel a from the soft-close mechanism by inserting a flat-bladed screwdriver into the gap from above and easing it off bit by bit. Take care not to damage the door seal.
^ Remove cover d . The soft-close mechanism is now no longer fixed to the appliance. ^ Remove panel a . ^ Slide soft-close mechanism bracket f as far as it will go towards the handle side of the door, and undo screws g on the soft-close mechanism.
Caution. The upper door is not secure as soon as the upper hinge plate is removed. ^ Close the upper door. ^ Undo screws m in upper hinge plate n and pull it upwards and off.
^ Push hinge pin e up and out from underneath. The soft-close mechanism is now no longer fixed to the appliance. ^ Remove panel a . ^ Slide soft-close mechanism bracket f as far as it will go towards the handle side of the door, and undo screws g on the soft-close mechanism.
^ Remove cap l from the bearing bush in the door and refit on the opposite side. Refitting the lower door ^ Unscrew threaded pin d by one turn using the allen key supplied. ^ Pull hinge pin a together with disc b and adjustable foot c upwards and off.
^ Screw hinge plate g into position on the opposite side using the two outer long slots only. To make it possible to align the door later, do not replace the centre screw at this stage. ^ Important. Screw the adjustable foot c into hinge pin a as far as it will go.
^ Insert the soft-close mechanism back into the door, starting at the right hand side. ^ Slide the soft-close mechanism back into the door as far as it will go towards the appliance using a flat-headed screwdriver. The screw holes on the left and right must line up perfectly.
Refitting the upper door ^ Then fit the upper door on middle hinge pin i . ^ Close the upper door. ^ Fit hinge plate n onto the opposite side and secure it with screws m . If necessary drill pilot holes for the screws or use a battery operated screwdriver.
^ First screw the soft-close mechanism onto the appliance side, then onto the handle side c , pushing it firmly towards the appliance. ^ Attach panel b to soft-close mechanism bracket d . ^ Push cover e on from the side so that the openings for the pin f are vertically aligned.
Refitting the handles Please make sure you follow the instructions below carefully when you refit the handles. The door seal will be damaged if the handle is fitted incorrectly. ^ Loosely attach the handle to the opposite side of the door with the two front screws b .
The appliance doors can be aligned with the housing after they have been fitted. In the following illustration the door is not shown in the closed position to make it easier to see what you have to do. To align the lower door use the long outer slots in the lower hinge plate: ^ Remove centre screw a from the hinge plate.
a Top box b Appliance c Housing unit d Wall The appliance can be installed in a kitchen run. To match the height of the rest of the kitchen, the appliance can be fitted with a suitable top box a . A ventilation gap of at least 50 mm depth must be allowed for behind the appliance across the entire width of the top box for air to circulate.
79.
Alteration rights reserved / 3611 KFN 14827 SDE ed/cs M.-Nr. 09 021 030 / 02.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Miele KFN 14827 SDEed è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Miele KFN 14827 SDEed - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Miele KFN 14827 SDEed imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Miele KFN 14827 SDEed ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Miele KFN 14827 SDEed, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Miele KFN 14827 SDEed.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Miele KFN 14827 SDEed. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Miele KFN 14827 SDEed insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
